Optical receiving transducer(CRO-2)
Product Presentation
The LED indicator light for the optical receiver is used to provide a large number of diagnostic features. Other information such as infrared signal quality and working status of the measuring head are included. Also check that the head actually sends a start signal. Check this situation with the Output status indicator, and the display is usually the same as the LED display of the corresponding head.
essential parameter
The head and receiver use optical modulation signal communication and are realized by triggering the needle according to certain rules;
Head and receiver multi-channel communication matching, strong anti-interference;
Test head start mode: power start;
Emission of three kinds of optical modulation signals: trigger, contact, low battery voltage;
Receive two optical modulation signals: start the measuring head;
Adjustment function of the head and handle: by adjusting the connection between the head body and the handle, the center of the needle overlaps with the center line of the head cone (deviation 2 μ m);
The display status of the indicator light: normal communication, trigger, low battery voltage;
Protection level: IP68
Product Size
| parameter declaration | explain | parameter | explain |
| Installation area | Machine tool processing area | levels of protection | IP 68 |
| Optical indicator light | Infrared transmission and header status | aspect | infrared transmission |
| source | DC 15-30V | Signal transmission distance | 5M |
| weight | 390g | Head measurement activation mode | Automatic on or M code |
| temperature range | 10℃-50℃ |
